Major 5230-54 ATL - 4 Post Lift
Major 5230-54 ATL WL 5.2 tonne ATL + Wheel Alignment Lift with 5400mm platforms (3000mm drive through width).
The AUTOPSTENHOJ Major MOT Series of class 4 & 7 MOT lifts compromises of three different models-two class 4 and one class 7. As with all other Major Lifts, these lifts are electro-hydraulically operated and are fitted with an eccentric brake and an obstruction system with alarm. As standard the lifts are fitted with heavy duty recessed steering turntables and are fully approved for MOT testing.
ALL AUTOPSTENHOJ lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
Major 5230-54 ATL WL 5.2 tonne ATL + Wheel Alignment Lift with 5400mm platforms (3000mm drive through width).
The AUTOPSTENHOJ Major MOT Series of class 4 & 7 MOT lifts compromises of three different models-two class 4 and one class 7. As with all other Major Lifts, these lifts are electro-hydraulically operated and are fitted with an eccentric brake and an obstruction system with alarm. As standard the lifts are fitted with heavy duty recessed steering turntables and are fully approved for MOT testing.
ALL AUTOPSTENHOJ lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
Major 5230-54 ATL WL 5.2 tonne ATL + Wheel Alignment Lift with 5400mm platforms (3000mm drive through width).
The AUTOPSTENHOJ Major MOT Series of class 4 & 7 MOT lifts compromises of three different models-two class 4 and one class 7. As with all other Major Lifts, these lifts are electro-hydraulically operated and are fitted with an eccentric brake and an obstruction system with alarm. As standard the lifts are fitted with heavy duty recessed steering turntables and are fully approved for MOT testing.
ALL AUTOPSTENHOJ lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
| Technical Specifications | ||
|---|---|---|
| Lifting Capacity | 5.2 Tonne | |
| Operation | Electro-hydraulic | |
| Power Requirements | 3 Phase | |
| Isolator Required | 16a | |
| Motor size | 3kW | |
| Platform Length | 5400mm | |
| Platform Width | 630mm | |
| Minimum Height | 160mm | |
| Maximum Height | 1830mm | |
| Front Arm Length | n/a | |
| Rear Arm Length | n/a | |
| Drive Through Width | 3000mm between posts | |
| Lifting/Lowering Time | 40/58 seconds | |
| Part Number | 005541 (IV + VII) |
Product Details
-
This lift comes with a 3 year parts and labour warranty which is subject to proof of maintenance.
Warranty exclusions :
Accidental damage, vandalism (non-fair wear and tear), acts of nature and unauthorised repairs by non-Gemco service agents. Package prices are for U.K. Mainland only.
Proof of maintenance will be required in the event of a warranty claim.
We offer a wide range of service contracts for this lift, please contact 0844 249 8102 for more information.
To download the HSE document for thorough examinations and testing of lifts follow the link below.
-
Drive-on ramps and stops for surface-mounting, alternatively drive-over ramps for recessed installation
WL = with front recesses for turn tables and rear side slip plates, centre cover plate between recesses and side slip plates
-
Surface-mounted or recessed installation
