Major 6530-60 ATL - 4 Post Lift
Major 6530-60 ATL - 6.5 tonne ATL lift with 6100mm platforms (3000mm drive through width).
The AUTOPSTENHOJ Major MOT Series of class 4 & 7 MOT lifts compromises of three different models-two class 4 and one class 7. As with all other Major Lifts, these lifts are electro-hydraulically operated and are fitted with an eccentric brake and an obstruction system with alarm. As standard the lifts are fitted with heavy duty recessed steering turntables and are fully approved for MOT testing.
All AUTOPSTENHOJ lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
Major 6530-60 ATL - 6.5 tonne ATL lift with 6100mm platforms (3000mm drive through width).
The AUTOPSTENHOJ Major MOT Series of class 4 & 7 MOT lifts compromises of three different models-two class 4 and one class 7. As with all other Major Lifts, these lifts are electro-hydraulically operated and are fitted with an eccentric brake and an obstruction system with alarm. As standard the lifts are fitted with heavy duty recessed steering turntables and are fully approved for MOT testing.
All AUTOPSTENHOJ lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
Major 6530-60 ATL - 6.5 tonne ATL lift with 6100mm platforms (3000mm drive through width).
The AUTOPSTENHOJ Major MOT Series of class 4 & 7 MOT lifts compromises of three different models-two class 4 and one class 7. As with all other Major Lifts, these lifts are electro-hydraulically operated and are fitted with an eccentric brake and an obstruction system with alarm. As standard the lifts are fitted with heavy duty recessed steering turntables and are fully approved for MOT testing.
All AUTOPSTENHOJ lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
| Technical Specifications | ||
|---|---|---|
| Lifting Capacity | 6.5 Tonne | |
| Operation | Electro-hydraulic | |
| Power Requirements | 3 Phase | |
| Isolator Required | 16a | |
| Motor size | 3kW | |
| Platform Length | 6000mm | |
| Platform Width | 630mm | |
| Minimum Height | 170mm | |
| Maximum Height | 1840mm | |
| Front Arm Length | n/a | |
| Rear Arm Length | n/a | |
| Drive Through Width | 3000mm between posts | |
| Lifting/Lowering Time | 40/58 seconds | |
| Part Number | 005567 (IV + VII) |
Product Details
-
This lift comes with a 3 year parts and labour warranty which is subject to proof of maintenance.
Warranty exclusions :
Accidental damage, vandalism (non-fair wear and tear), acts of nature and unauthorised repairs by non-Gemco service agents. Package prices are for U.K. Mainland only.
Proof of maintenance will be required in the event of a warranty claim.
We offer a wide range of service contracts for this lift, please contact 0844 249 8102 for more information.
To download the HSE document for thorough examinations and testing of lifts follow the link below.
-
Integrated eccentric brake system
Emergency stop valve
Obstruction system
Pneumatic parking system in height adjustable ratchets
Pump and control unit on rear left post; delivered with extra control unit for front right post
Pushbutton control unit with alarm signal
Hydraulic cylinder under left platform
Lifting and lowering by means of cables
Emergency lowering valve
Both platforms fixed.
Platforms prepared for AUTOPSTENHOJ scissor jack
Standard colours:
Platforms & posts: grey RAL 7016, ramps: red RAL 3020
-
Surface-mounted or recessed installation
