Major 4026-47 ATL - 4 Post Lift
Major 4026-47 ATL - 4 tonne ATL lift with 4680mm platforms (2600mm drive through width).
The AUTOPSTENHOJ Major MOT Series of class 4 ATL lifts compromises of three different models. As with all other Major Lifts, these ATL lifts are electro-hydraulically operated and are fitted with an eccentric brake and an obstruction system with alarm. As standard, the lifts are fitted with heavy duty recessed steering turntables and pneumatically operated play detectors. These lifts are fully approved for MOT/ATL testing (ONE MAN).
All AUTOPSTENHOJ lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
Major 4026-47 ATL - 4 tonne ATL lift with 4680mm platforms (2600mm drive through width).
The AUTOPSTENHOJ Major MOT Series of class 4 ATL lifts compromises of three different models. As with all other Major Lifts, these ATL lifts are electro-hydraulically operated and are fitted with an eccentric brake and an obstruction system with alarm. As standard, the lifts are fitted with heavy duty recessed steering turntables and pneumatically operated play detectors. These lifts are fully approved for MOT/ATL testing (ONE MAN).
All AUTOPSTENHOJ lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
Major 4026-47 ATL - 4 tonne ATL lift with 4680mm platforms (2600mm drive through width).
The AUTOPSTENHOJ Major MOT Series of class 4 ATL lifts compromises of three different models. As with all other Major Lifts, these ATL lifts are electro-hydraulically operated and are fitted with an eccentric brake and an obstruction system with alarm. As standard, the lifts are fitted with heavy duty recessed steering turntables and pneumatically operated play detectors. These lifts are fully approved for MOT/ATL testing (ONE MAN).
All AUTOPSTENHOJ lifts are led through a sling purifying plant (according to SA2.50 – ISO-Norm 8501-1:2007), dipped in primer and finally led through an electrostatic powder bake plant.
| Technical Specifications | ||
|---|---|---|
| Lifting Capacity | 4 Tonne | |
| Operation | Electro-hydraulic | |
| Power Requirements | 3 Phase | |
| Isolator Required | 16a | |
| Motor size | 3kW | |
| Platform Length | 4680mm | |
| Platform Width | 630mm | |
| Minimum Height | 140mm | |
| Maximum Height | 1810mm | |
| Front Arm Length | n/a | |
| Rear Arm Length | n/a | |
| Drive Through Width | 2600mm between posts | |
| Lifting/Lowering Time | 24/26 seconds | |
| Part Number | 005556 (IV) |
Product Details
-
This lift comes with a 3 year parts and labour warranty which is subject to proof of maintenance.
Warranty exclusions :
Accidental damage, vandalism (non-fair wear and tear), acts of nature and unauthorised repairs by non-Gemco service agents. Package prices are for U.K. Mainland only.
Proof of maintenance will be required in the event of a warranty claim.
We offer a wide range of service contracts for this lift, please contact 0844 249 8102 for more information.
To download the HSE document for thorough examinations and testing of lifts follow the link below.
-
Integrated eccentric brake system
Emergency stop valve
Obstruction system
Pneumatic parking system in height adjustable ratchets
Pump and control unit on rear left post; delivered with extra control unit for front right post
Pushbutton control unit with alarm signal
Hydraulic cylinder under left platform
Lifting and lowering by means of cables
Emergency lowering valve
Both platforms fixed.
Platforms prepared for AUTOPSTENHOJ scissor jack
Standard colours:
Platforms & posts: grey RAL 7016, ramps: red RAL 3020
-
Set expansion bolts
LED-lighting set
Set of two cover plates for recesses
Set of two 385 mm ramp extensions
Set of two platform extensions (0.5 m)
Set of two cover plates
